Personnel Information

写真a

Oishi Yoshihiko


Affiliation centers1, etc

The Center for Creative Collaboration

The master's program in charge

Division of Production Systems Engineering

The department in charge

Department of Engineering

Job title

Associate Professor

E-mail Address

E-mail address

Research field 【 display / non-display

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Fluid engineering

  • Frontier Technology (Aerospace Engineering, Marine and Maritime Engineering) / Marine engineering

Keywords for Research Field 【 display / non-display

  • Drag reduction

  • Multiphase flow

  • Turbulent

  • Flow visualization

  • Fluid measurement

display all >>

Research themes 【 display / non-display

  • Frictional drag reduction by injected bubbles

    Bubbly flow,Drag reduction,Turbulent flow,2012.04 ~ 2022

  • Cold heat recovery by Metal Hydride

    Metal hydride ,Actuator,Renewable energy,2017 ~ 2022

  • Carbon neutral fuel

    Biodiesel fuel,Dual fuel mode engine,Biogas,2015.04 ~ 2022

  • Particle Image Velocimetry on large scale flow field

    Fluidics,Flow visualization,Measurement,2012.04 ~ 2021

  • PIV based on Pressure field measurement

    粒子画像流速測定法,圧力場推定,流体解析,2013.04 ~ 2019

display all >>

Graduate school・Graduate course, etc. 【 display / non-display

  • University of Fukui

    2005.03,Master's program,Graduate School, Division of Engineering,ファイバーアメニティ工学専攻,Completed

  • Hokkaido university

    2008.03,Doctor's Course,Graduate School, Division of Engineering,エネルギー環境システム専攻,Completed

Degree 【 display / non-display

  • Bachelor of Degree

  • Master of Degree

  • Ph.D.

    Study on Mechanism of Frictional Drag Reduction by Bubbles

Career 【 display / non-display

  • Hokkaido university(Research Fellow)

    2008.04 ~ 2009.03

  • Toyota central R&D Labs., Inc(Visiting Researcher)

    2009.04 ~ 2011.03

  • Otsuka electronics Inc(Researcher)

    2011.04 ~ 2012.03

  • Hokkaido university(Assistant Professor)

    2012.03 ~ 2015.03

Academic Society 【 display / non-display

  • The Japan Society of Mechanical Engineers

  • The Japanes Society for Multiphase Flow

  • The Visualization Society of Japan

  • Society of Automotive Engineers of Japan

  • 日本雪工学会

display all >>

Academic prize 【 display / non-display

  • 2019年度日本混相流学会賞 論文賞

    2020.08.22,日本混相流学会

  • 日本機械学会流体工学部門 貢献表彰

    2019.11.07,日本機械学会流体工学部門

  • 日本混相流学会論文賞

    2010.07.20,日本混相流学会

  • 研究技術賞

    2016.03.08,日本機械学会北海道支部

  • 流れの夢コンテスト 優秀賞 流体力学的札幌市

    2008.10.13,日本機械学会流体工学部門

display all >>

 

Flow control of Frictional drag reduction by injected bubbles

Purpose of Research

Frictional Drag Reduction by Injected Bubbles

We are making continuing effort to improve Particle Image Velocimetry as applying these methods to a variety of flowfields where conventional techniques were impossible or invalid, targeting to clarify the essential flow characteristics in those configurations. Applying this method and the way of approach to solution, we select the research topics that will respond to industrial needs.

Summary of Research

New technology of measurement for multiphase flow

The research of bubble is classified Multiphase flow in fluid dynamics. Multiphase flow is research field which include solid, liquid and gas. The research of bubble oganaized liquid and gas called a gas-liquid two-phase flow. But Albert Einstein(1879-1955) is one of scientist which has interest in gas-liquid two-phase flow (Einstein, A. 1906, Effect of suspended rigid spheres on viscosity, Ann. Phys. 4, p. 289). We expect that the mechanisms of drag reduction by injected bubbles are interaction between bubbles and turbulent structures, bubble deformation, or chenge of effective viscosity.

Research Content

Features / Benefits of Research

1.Point of research 2.Research of novelty
  • Interaction between turublent structures and bubbles
  • Arrangement of complicated mechanism for drag reduction
  • LASER shear stress meter
  • Measurement of turbulent flow
  • Bubble-bubble Interaction
3.Primacy of Technology 4.Situation of patent-related
  • Low environment load
  • High degree of usability
  • International competitiveness
  • High added value
  • 特願2018-064099
  • 特開2019-007939
  • 新技術説明会2019(製造技術)
  • 特許6986265
 

Papers 【 display / non-display

  • Downstream persistence of frictional drag reduction with repetitive bubble injection

    Taiji Tanaka, Yoshihiko Oishi, Hyun Jin Park, Yuji Tasaka, Yuichi Murai, Chiharu Kawakita,Ocean Engineering,vol.272,(p.1 ~ 12),Article Number:113807,2023.03

  • Frictional drag reduction caused by bubble injection in a turbulent boundary layer beneath a 36-m-long flat bottom model ship

    Taiji Tanaka, Yoshihiko Oishi, Hyun Jin Park, Yuji Tasaka, Yuichi Murai, Chiharu Kawakita,Ocean Engineering,vol.252,(15),Article Number:111224,2022.05

  • 乱流境界層への気泡注入による摩擦抵抗低減効果:長尺模型船実験と実スケール性能 の推定

    田中泰爾,大石義彦,朴炫珍,田坂裕司,村井祐一,川北千春,日本機械学会論文集,vol.88,(907),Article Number:21-00279,2022.03

  • Repetitive bubble injection promoting frictional drag reduction in high-speed horizontal turbulent channel flows

    Taiji Tanaka, Yoshihiko Oishi, Hyun Jin Park, Yuji Tasaka, Yuichi Murai, Chiharu Kawakita,Ocean Engineering,vol.239,Article Number:109909,2021.11

  • 零度以下環境における水素吸蔵合金ヒートポンプの平衡圧力と温度上昇の関係

    大石義彦,北林真,河合秀樹,吉田静男,KAGAKU KOGAKU RONBUNSHU,vol.47,(6),(p.200 ~ 205),2021.11

display all >>

International conference proceedings 【 display / non-display

  • Sampling scheme for wall shear stress in bubbly channel flow by variable-interval time-averaging method

    Yoshihiko Oishi, Hyun Jin Park, Yuichi Murai, Yuji Tasaka, Hideki Kawai,The 11th International Conference on Multiphase Flow (ICMF2023),(p.1 ~ 2),2023.04,Kobe

  • Measurement of multiphase flow in rotating field by ultrasonic velocity profiler

    Takumi Konno, Yoshihiko Oishi, Hideki Kawai, Sho Osanai,Proceedings of The 13th Pacific Symposium on Flow Visualization and Image Processing,(p.1 ~ 5),Article Number:123,2022.08,Tokyo

  • Bubbly drag reduction promoted by generating void waves in high-speed turbulent channel flows

    Taiji Tanaka, Hyun Jin Park, Yoshihiko Oishi, Yuji Tasaka, Yuichi Murai, and Chiharu Kawakita,The 12th Japan-U.S. Seminar on Two-Phase Flow Dynamics 2022,Article Number:T3-2,2022.05,Virtual

  • Application of variable interval time averaging method to waveform of wall shear stress in bubbly channel flow

    Yoshihiko Oishi, Hyun Jin Park, Yuichi Murai, Yuji Tasaka, and Hideki Kawai,The 12th Japan-U.S. Seminar on Two-Phase Flow Dynamics 2022,Article Number:T3-3,2022.05,Virtual

  • Effect of Erosion at Rotating Slurry Wear Test in Alkaline Solution

    Hirotaka Kuchiiwa, Hideki Kawai, Yoshihiko Oishi, Kenta Kusumoto, Kazumichi Shimizu,The 12th International Symposium on the Science an Processing of Cast Iron(SPCI-XII),(p.83 ~ 84),Article Number:35,2021.11,Muroran

display all >>

Editorial and Commentary 【 display / non-display

  • Laser shear stress meter and intelligent turbulence control

    大石義彦,OPTRONICS,(6),(p.133 ~ 138),2020.06

  • 室蘭工業大学大学院工学研究科 生産システム工学系専攻 流体工学研究室

    大石義彦,河合秀樹,混相流,vol.34,(2),(p.365 ~ 370),2020.06

Research reports 【 display / non-display

  • 水素吸蔵合金アクチュエータ開発に向けた熱交換システムと理論構築

    大石義彦,福田将真,北林勇人,辻永佑真,河合秀樹,亀川厚則,第2回クリエイティブコラボレーションセンターワークショップ,2023.03

  • ゼロカーボン技術開発にむけた温度変化サイクルによる水素圧力の評価

    北林勇人,福田将真,大石義彦,河合秀樹,吉田静男,ザ・シンポジウムみなとin室蘭~巷からはじまるカーボンニュートラル,2022.09

Presentaion at conference, meeting, etc. 【 display / non-display

  • 氷点下用水素吸蔵合金の繰り返し温度変化における温度差一定による水素圧力に与える影響

    福田将真,大石義彦,河合秀樹,吉田静男,北林勇人,第38回 寒地技術シンポジウム,寒地技術論文・報告集 Vol.38,(p.201-206),2022.11.30,札幌

  • 冷熱回収に向けた水素吸蔵合金の繰返し温度変化の実験的研究

    北林 勇人,大石 義彦,福田 将真,河合 秀樹,吉田 静男,第42回水素エネルギー協会大会,水素エネルギー協会,全日程要旨集,(p.112-115),2022.11.28

  • 超音波流速分布計を用いた摩耗条件下におけるスラリー流動の計測

    大石義彦,谷塚智大,小山内勝,河合秀樹,楠本賢太,木倉宏成,佐藤森,埜上洋,日本機械学会 第100期流体工学部門講演会,予稿集No.22-40, OS13-04,(p.1-4),2022.11.12

  • 乱流境界層において局所ボイド率の変動が生み出す抵抗低減効果

    田中泰爾, 大石義彦, 朴炫珍, 田坂裕司, 村井 祐一, 川北千春,日本機械学会 第100期流体工学部門講演会,予稿集No.22-40, OS05-18,(p.1-4),2022.11.12

  • 薄板省合金二相ステンレス鋼の衝撃特性評価

    成田和音,立山耕平,藤木裕行,大石義彦,河合秀樹,臺丸谷政志,日本機械学会 M&M2022 材料力学カンファレンス,講演予稿集 PDF,OS1729,2022.09.26

display all >>

Patent acquisition 【 display / non-display

  • 測定システム

    特願2018-064099,特開2019-007939,特許第6986265号

 

Class subject in charge 【 display / non-display

  • 機械ロボット工学実験

    2023,Department

  • 流体力学特論

    2023,Master's program

  • 機械工学実験

    2022,Department

  • 流体力学Ⅰ

    2022,Department

  • 機械ロボット工学実験

    2022,Department

display all >>

 

International research cooperation activities 【 display / non-display

  • Biomass fuel evaluation and engine characteristics

    インドネシア,University of Sumatera Utara,2022.04

  • Biodiesel dual fuel mode engine characteristic survey

    インドネシア,University of Sumatera Utara,2018.04 ~ 2024.03

  • Three dimensional measurement in Taylor-Couette bubbly flow

    France,French Naval Academy /Ecole Navale,2017.09

  • Three dimensional measurement in Taylor-Couette bubbly flow

    France,French Naval Academy /Ecole Navale,2016.09