Personnel Information

写真a

Osafune Yasuhiro


The master's program in charge

Division of Production Systems Engineering

The department in charge

Department of Engineering

Job title

Lecturer

E-mail Address

E-mail address

Research field 【 display / non-display

  • Materials Science

  • Strength of Materials

  • Fracture Mechanics

  • Nanotechnology/Materials / Material processing and microstructure control

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering

display all >>

Keywords for Research Field 【 display / non-display

  • Cast iron

  • Strength of Materials

  • Heat treatment

Graduate school・major, etc. 【 display / non-display

  • Muroran Institute of Technology

    1989.03,Faculty of Engineering,金属工学科,Graduate,Japan

Degree 【 display / non-display

  • Doctor of Engineering

    オーステンパ球状黒鉛鋳鉄の水脆化機構とその防止および応用

Academic Society 【 display / non-display

  • The Japan Society of Powder and Powder Metallurgy

  • The Japan Society of Mechanical Engineers

  • The Japan Institute of Metals

  • The Japan foundry engineering society

Academic prize 【 display / non-display

  • 日下賞

    2001.05.12,日本鋳造工学会

  • 2013年度日本機械学会賞(論文)

    2014.04.18,一般社団法人 日本機械学会

  • 野口徹賞

    2022.04.15,日本鋳造工学会北海道支部

 

Development of high strength and ductile cast iron

Purpose of Research

The study intend to impruve strenth and ductility of cast iorn by controling casting condition and heat-treatment.

Summary of Research

I make high strenth and dutile cast iron, is called ADI, by austemper heat treat ment. Embrittlement behavior of ADI in wet conditons is studied.
Research Content

Features / Benefits of Research

1.Point of research 2.Research of novelty
  • Embrittlement mechanism of ADI putting on water is revealed.
  • Method of preventing embrittlement of ADI in wet conditions is revealed.
  • Methd of preventing embrittlement of ADI in wet conditon was revealed.
3.Primacy of Technology 4.Situation of patent-related
  • It is possible to take ADI without embrittlement in wetconditions by our method.
  • 特許3704676
 

Books 【 display / non-display

  • 機械工学年鑑2018

    長船康裕,一般社団法人 日本機械学会,6.2.1 鋳造,(p.43),2018.08

  • 室蘭工大 未来をひらく技術と研究

    佐藤一彦,関根ちひろ,桃野正,長船康裕,他37名,北海道新聞社,温故知新 鋳物の新たな可能性,(p.8),2014.07

  • 鋳物技術者と機械設計技術者のための新版 鋳鉄の材質

    中江秀雄,堀江 皓,木口昭二,野口徹,小松眞一郎,香川明男,平塚貞人,菅野利猛,水野慎也,石原 安興,野口昌彦,藤川貴朗,米田博幸,旗手稔,清水一道,堀川紀孝,清水宏明,長船康裕,笹栗信也,頓所政次,日本鋳造工学会,第3章鋳鉄の機械的性質及び諸性質 3.12オーステンパ球状黒鉛鋳鉄,(p.3),2012.05

Papers 【 display / non-display

  • Investigation of prediction method for crack and deformation of cementedd carbide cast-in insertion multi-component white cast irons by thermal stress analysis

    村瀬 滋哉, 清水 一道, 楠本 賢太, 松本 大樹, 長船 康裕, リキ ヘンドラ プルバ,Journal of Japan foundry engineering society,vol.92,(7),(p.339 ~ 344),2020.07

  • Simulation of rolling contact fatigue strength for traction drive elements (comparison with fatigue test)

    Yukihito NARITA, Masashi YAMANAKA, Toshiharu KAZAMA, Yasuhiro OSAFUNE, Tomoya MASUYAMA,Journal of Advanced Mechanical Design, Systems, and Manufacturing,vol.12,(1),(p.JAMDSM0024 ~ ),2018.02

  • Erosion of Grooved Surfaces by Cavitating Jet with Hydraulic Oil

    Toshiharu Kazama, Kento Kumagai, Yasuhiro Osafune, Yukihito Narita, Shohei Ryu,Journal of Flow Control, Measurement&Visualization,(3),(p.41 ~ 50),2015.03

  • Effect of crowning radius on rolling contact fatigue strength for traction drive elements (Evaluation by simulation)

    Yukihito NARITA, Naoto KATO, Masashi YAMANAKA, Toshiharu KAZAMA, Yasuhiro OSAFUNE, Tomoya MASUYAMA,Journal of Advanced Mechanical Design, Systems, and Manufacturing,vol.8,(6),(p.JAMDSM0081 ~ ),2014.08

  • 肉厚2㎜の薄肉球状黒鉛鋳鉄のミクロ組織に及ぼす炭素量とけい素量の影響

    王強,長船康裕,田湯善章,桃野正,鋳造工学,vol.86,(6),(p.471 ~ 475),2014.06

display all >>

International conference proceedings 【 display / non-display

  • SIMULATION OF ROLLING CONTACT FATIGUE STRENGTH FOR TRACTION DRIVE ELEMENTS (OBTAINING OF S-N CURVE BY FATIGUE TEST)

    Yukihito NARITA, Ryousuke SATO, Tatsuya SASAGAWA, Masashi YAMANAKA, Toshiharu KAZAMA, Yasuhiro OSAFUNE, Tomoya MASUYAMA,Proceedings of the JSME International Conference on Motion and Power Transmissions 2017 (MPT2017),vol.No.17-201,(11-5),2017.02,京都市

  • Effect of Rare-earth Element on Microstructure of Flaky Graphite Cast Iron Contained Ce

    Kengo Ohashi, Yasuhiro Osafune,Wang Qiang, Yoshinori Tayu, Atsuya Toba,Book of abstracts Muroran-IT Rare Earth Workshop 2016,(p.59),2016.06,留寿都村(北海道)

  • Effect of Ce as Chilling Inhibitor on Microstructure of Thin Wall Ductile Cast Iron

    Yasuhiro Osafune, Wang Qiang, Yoshinori Tayu, Atsuya Toba, Yoshimitsu Shibata,Book of abstracts Muroran-IT Rare Earth Workshop 2016,(p.57),2016.06,留寿都村(北海道)

  • Effects ofoblique surfaces with grooves on erosion by cavitation oil jet

    Toshiharu Kazama, Kento Kumagai, Yasuhiro Osafune, Yuhihito Narita, Shohei Ryu,Proc. The 12th International symposium on fluid control, measurement and visualization,vol.OS1-03-4,(10pages),(p.USB ~ ),2013.11,Nra, Japan

  • Effect of Carbon Content on Microstructure and Shrinkage of Thin-walled Ductile Cast Iron

    Qiang Wang, Yasuhiro Osafune, Tadashi Momono,Joint Symposium on Mechanical - Industrial Engineering and Robotics 2013,(p.1),2013.11,Chiang Mai, Thailand

display all >>

Editorial and Commentary 【 display / non-display

  • 6. 機械材料・材料加工6.2 材料加工 6.2.1 鋳造

    鳥塚 史郎,西田 進一,南口 誠,細井 厚志,長船 康裕,松本 良,高山 哲生,宮下 幸雄,谷口 幸典,青野 祐子,岡部 洋二, 燈明 泰成,佐藤 知広,機械工学年鑑2022電子版,2022.08

  • 機械工学年鑑2021 6. 機械材料・材料加工 6.2.1 鋳造

    機械工学年鑑2021,2021.07

  • 機械工学年鑑2020 5. 機械材料・材料加工 5.2.1 鋳造

    長船康裕,機械工学年鑑2020,2020.07

  • 機械材料・材料加工 6.2.1 鋳造

    鳥塚史郎,西田進一,南口誠,荻原慎二,長船康裕,高山哲生,安井利明,谷口幸典,青野祐子,機械工学年鑑2019,2019.08

  • 「超音波による材料評価技術」最近の状況

    鹿毛秀彦,長船康裕,鋳造工学,vol.87,(11),(p.782 ~ 784),2015.11

display all >>

Research reports 【 display / non-display

  • レーザ部分熱処理によるダイカスト金型の長寿命化技術の開発

    櫻庭洋平, 戸羽篤也, 鶴谷知洋, 鈴木逸人, 三戸正道, 宮腰康樹, 板橋孝至, 中嶋 快雄, 飯野潔, 髙田 公一, 高橋保行, 斉藤倫正, 大津直史, 長船康裕,北海道立総合研究機構工業試験場報告,vol.320,(320),(p.47 ~ 56),2022.04

  • ADIのヤング率に及ぼす熱処理条件の影響

    長船康裕,日本鋳造工学会 研究報告120 鋳造品実態での評価技術の確立に関する研究(Ⅱ),(p.33 ~ 41),2017.10

  • 3D積層造形法で製作したマルエージング鋼材の金属組織

    戸羽篤也,鈴木逸人,平野繁樹,長船康裕,葛西勝明,葛西健央,北海道総合研究機構工業試験場報告,(316),(p.69 ~ 76),2017.08

  • アルミニウム合金によるセラミクスの鋳ぐるみ

    長船康裕,田中雄一,「鋳造を利用した複合化・接合プロセス」日本学術振興会 鋳物臺4委員会複合化プロセス分科会編,(p.117 ~ 118),2008.02

  • ADI材の水脆化現象の特徴とその発生機構

    小松眞一郎,長船康裕,渋谷慎一郎,鋳鉄の高性能化とそのプロセッシング,(p.161 ~ 176),2006

display all >>

Presentaion at conference, meeting, etc. 【 display / non-display

  • 接合面形状を付与した金属AM造形材による異種材料接合技術の検討

    鈴木逸人 , 戸羽篤也 , 長船康裕,日本鋳造工学会第180回全国講演大会,日本鋳造工学会,日本鋳造工学会第180回全国講演大会講演概要集,(p.122-122),2022.09.29,広島市,Japan

  • 球状黒鉛鋳鉄で鋳ぐるみした金属AMマルエージング鋼の接合強度に及ぼす接合界面反応層の影響

    ⻑船 康裕,中川久,戶羽 篤也,鈴木 逸人,鶴谷 知洋,小椋 博樹,泉上 和範,日本鋳造工学会第180回全国講演大会,日本鋳造工学会,日本鋳造工学会第180回全国講演大会講演概要集,(p.14-14),2022.09.29,広島市,Japan

  • 球状黑鉛鋳鉄による金属AMで造形したマルエージング鋼の鋳造接合

    ⻑船 康裕,糸井 僚太郎,戶羽 篤也,鈴木 逸人,鶴谷 知洋,小椋 博樹,泉上 和範,日本鋳造工学会第179回全国講演大会,日本鋳造工学会,日本鋳造工学会第179回全国講演大会概要集,(p.82-82),2022.05.21,名古屋市,Japan

  • X線デバイリングの半価幅と鋳鉄組織の関係

    ⻑船 康裕,⼩坂 美央,令和4年度 日本鋳造工学会北海道支部講演大会,日本鋳造工学会北海道支部,令和4年度 日本鋳造工学会北海道支部講演大会講演概要集,(p.3-3),2022.04.15,Web,Japan

  • 2相ステンレスと溶接構造⽤圧延鋼材の溶接部における⽋陥⾮破壊評価

    髙井 恭兵,⻑船 康裕,柴⽥ 義光,⾼⽥ 紳吾,⻄村 公利,令和4年度 日本鋳造工学会北海道支部講演大会講演概要集,本鋳造工学会北海道支部,令和4年度 日本鋳造工学会北海道支部講演大会,(p.2-2),2022.04.15,Web,Japan

display all >>

Patent acquisition 【 display / non-display

  • ホウ酸アルミニウムのウィスカーの製造方法

    特願2015-153930,特開2017-031016,特許第6509668号

Works 【 display / non-display

  • オーステンパ球状黒鉛鋳鉄のミクロ組織

    2007,湯山 将史,長船 康裕,日本機械学会北海道支部フォーラム

 

Class subject in charge 【 display / non-display

  • 機械工学実験

    2023,Department

  • 機械ロボット工学実験

    2023,Department

  • 機械製作学

    2023,Department

  • 機械製作学

    2023,Department

  • 機械ロボット工学演習

    2023,Department

display all >>